9
Remove any jammed paper from the right cover of the saddle stitcher unit (F-C6).
● If parts of the paper are left on top of the feeding belt, open the guide, and remove any parts of the paper left:
☐ Open the delivery guide.
This procedure is only required if the Inner Booklet Trimmer is not attached.
10
Push the saddle stitcher unit (F-C5), and close the front cover of the finisher.
11
Follow the instructions on the touch panel display.
1. Open the right cover (F-C6).
2. Remove any jammed paper.
3. Close the right cover (F-C6).
1. Open the delivery guide.
2. Remove any jammed paper.
3. Close the delivery guide.
1. Gently push the saddle stitcher unit (F-C5) back into the
machine.
Always make sure to push the saddle stitcher unit in as far as it can go.
When returning the saddle stitcher unit to its original position, be
careful not to get your fingers caught, as this may result in personal
injury.
2. Close the front cover of the finisher.
Clearing Paper Jams
2-61
2