Canon imageRUNNER ADVANCE 8085 Maintenance Manual page 37

17
Load the paper stack into the paper deck, and then lower the feeding support roller.
18
Place a magnet label indicating the new paper size on the POD Deck Lite.
19
Close the paper deck.
The inside lifter automatically rises, and prepares the paper deck for feeding.
1. Load the paper stack.
- To load paper larger than LGL, first close the paper deck to raise the
inside lifter, open the paper deck, and then load the paper. If you try
to load paper larger then LGL when the inside lifter is at its lowest
position, the paper may not be loaded properly, and paper jams may
occur.
- Never place paper or any other items in the empty part of the paper
deck. Doing so may lead to a malfunction of the machine.
When loading paper, make sure that the height of the paper stack
does not exceed 13/16" (20 mm). If the height of the paper stack
exceeds 13/16" (20 mm), the edges of the paper stack may become
curled or creased, and poor print quality may result.
2. Lower the feeding support roller.
Paper Deck Unit-C1/POD Deck Lite-A1 (Optional)
1
1-25