Operation - BWT AQA Perla Installation And Operating Manual

GB GB GB GB
GB
NaCL
Regeneration
NaCL
00 : 17 : 35
1 6 1 6 1 6 1 6 1 6
NaCL
NaCL
NaCL

Operation

Operation
Operation Operation Operation
Please note that there is a separate
manual for the multiblock module and
connection set DN 32/32.
Manually start regeneration Manually start regeneration Manually start regeneration Manually start regeneration Manually start regeneration
Press the Browse
Set the cursor to Manual
Press OK
The cursor is set to Regeneration
H O
2
Press OK
Regeneration of the currently active col-
umn is performed. The other columns
control the soft water supply.
H O
2
Press the Browse
Each stage of the regeneration process
is displayed with the progressing time.
Regeneration takes 17 minutes.
Additional disinfection is not required if
the columns are regenerated regularly
(by the quantity controller or time over-
ride controller). In unfavourable condi-
tions, e.g. if the unit is located in a warm
room and hasn't been used for a long
time, it may need to be disinfected by
staff from our after-sales service in ad-
dition to regeneration.
Browse Browse
Browse button. Browse
Manual Manual Manual Manual.
OK OK OK OK.
Regeneration Regeneration
Regeneration. Regeneration
OK OK OK OK to confirm.
Browse Browse Browse button twice. Browse