BWT AQA Perla Installation And Operating Manual page 13

l/h
Current softened water supply
Liter Liter Liter Liter Liter
IN IN IN IN IN 25 25
25 25 25
OUT OUT 5 5 5 5 5 OUT
OUT OUT
Enter hardness of water Enter hardness of water Enter hardness of water
Enter hardness of water Enter hardness of water
l/h
Current softened water supply
Time
Σ
3
m :
480
°dH °dH °dH °dH °dH
°dH °dH
°dH °dH °dH
°dH °dH °dH
°dH °dH
Time
Σ
m 3 :
480
Setting the hardness of water Setting the hardness of water Setting the hardness of water Setting the hardness of water Setting the hardness of water
The hardness of drinking water
measured on site and the desired
hardness of blended water is entered
here.
The blending valve must also be The blending valve must also be
The blending valve must also be The blending valve must also be The blending valve must also be
adjusted (page 14). adjusted (page 14). adjusted (page 14). adjusted (page 14). adjusted (page 14).
Press the Browse Browse button. Browse Browse Browse
Set the cursor to Settings. Settings. Settings. Settings.
Settings.
Press OK OK OK OK. OK
You can make the following settings
here:
The blended water supply blended water supply blended water supply blended water supply blended water supply can be
displayed in litres litres, m m m m m litres litres 3 3 3 3 3 or US gallons
litres
Water hardness can be displayed in
°dH, °fH °dH °dH °fH °fH, °eH, CaCo3 °fH °eH, CaCo3 °eH, CaCo3 °eH, CaCo3 (ppm
°dH °dH °fH °eH, CaCo3
IN IN IN IN IN Hardness of drinking water
Enter the measured hardness of the
drinking water.
OUT OUT OUT OUT OUT Hardness of blended water
Enter desired hardness of the blended
water (BWT recommendation 4°-8°dH).
Move the arrow horizontally to the
required field.
The field is highlighted.
The value or the unit can be changed
with the up/down arrows.
The changed values are saved The changed values are saved The changed values are saved The changed values are saved The changed values are saved
immediately. . . . . immediately immediately
immediately immediately
Press the Browse Browse Browse button twice. Browse
Browse
The programming necessary for The programming necessary for The programming necessary for
The programming necessary for The programming necessary for
starting the unit is complete. starting the unit is complete. starting the unit is complete. starting the unit is complete. starting the unit is complete.
GB GB GB GB GB
US gallons US gallons. US gallons
US gallons
ppm). ppm ppm
ppm
1 3 1 3 1 3 1 3 1 3