Intended Use - BWT AQA Perla Installation And Operating Manual

GB GB GB GB
GB
7 7 7 7 7
8 8 8 8 8
9 9 9 9 9
10 10 10 10 10
4 4 4 4 4
Scope of Deliver er er er ery y y y y Scope of Deliv Scope of Deliv
Scope of Deliv Scope of Deliv
1 1 1 1 1
AQA Perla duplex water softening unit AQA Perla duplex water softening unit
AQA Perla duplex water softening unit with: AQA Perla duplex water softening unit AQA Perla duplex water softening unit
1 1 1 1 1
Microprocessor controller
2 2 2 2 2 Cap
2 2 2 2 2
3 3 3 3 3 Storage area for regenerative
4 4 4 4 4 Brine dosing tank
5 5 5 5 5 Sieve base with float switch for empty
indicator
6 6 6 6 6 Brine cavity
7 7 7 7 7
Multiple-way control valves
8 8 8 8 8 Softened water outlet
9 9 9 9 9
Hard water inlet
3 3 3 3 3
10 10 10 10 10 Softening column with ion exchanger
- Power supply unit with cable and mains plug
- 1" connection module
- Multiblock module A
- Connection set DN 32/32 DVGW
- 2m flushing water hose
- 2m overflow hose 18 x 24
- Fixing material
- AQUATEST hardness tester
Optional extras Optional extras
Optional extras Optional extras Optional extras
(not included in scope of delivery):
- Aquastop 3/4"
- Aquastop 1"
4 4 4 4 4
5 5 5 5 5
6 6 6 6 6

Intended Use

Intended Use
Intended Use Intended Use Intended Use
AQA Perla is intended for the softening or partial
softening of drinking and service water (according
to relevant standards and rulings, DIN 1988, part
2 and 7 and regulations of the DVGW [German
association of gas and water specialists]). It is also
designed to prevent calcification damage to water
pipes, fittings, boilers and other equipment and to
prevent malfunctioning.
Order no.: 11825
Order no.: 11826