Operation - BWT Aqa perla Installation And Operating Manual

NaCL
Regeneration
NaCL
NaCL
00 : 17 : 35
H O
2
NaCL
H O
2
NaCL

Operation

Operation
Operation Operation Operation
Please note that there is a separate oper-
ating manual for the multiblock module
and connection set DN 32/32.
Starting regeneration manually Starting regeneration manually Starting regeneration manually Starting regeneration manually Starting regeneration manually
Press the Bro Browse Bro Bro Bro wse wse wse button wse
Set the cursor to Man Man Manual Man ual ual ual
Man ual
Press OK OK OK OK
OK
The cursor is set to Regener Regener Regener Regeneration Regener
Press OK OK OK to confirm OK
OK
Regeneration of the currently active col-
umn is performed. The other column con-
trols the soft water supply.
Press the Bro Bro Browse Bro Bro wse button twice wse wse wse
Each stage of the regeneration process is
displayed with the progressing time.
The regeneration process takes 17
minutes.
Additional disinfection is not required if the
regenerations occur regularly (by the
quantity controller or time override con-
troller). In unfavourable conditions, e.g. if
the unit is located in a warm room and
has not been used for a long time, it may
need to be disinfected by staff from our
after-sales service in addition to
GB GB GB GB GB
ation ation ation ation
39 39 39 39 39