Table of Contents
Advertisement
Entering into the environment setup mode
Press [SET] button of the ACP IV to enter into the environment setup mode of the ACP IV.
When the [SET] button is pressed for the first time, the menu to set the IP address is displayed as
shown below.
Press up/down(▲, ▼) button to place the arrow on the desired function.
• When you select [Network Info] and press [SET] button, it enters the No. 1 menu in the
following figure. In [Network Info] menu, input the network information such as IP address of
the ACP IV.
• When you select [Function] and press [SET] button, it enters the No. 2 menu in the following
figure. In [Function] menu, ACP IV software service function is supported.
LG ACP IV
SW ver. 1.0.0
IP
192.168.001.100
GW 192.168.001.001
Caution
[Function] menu is used by the system air conditioner service technician, so user shallnever
y
use this function.
If this function is incorrectly used, it may cause disorder of the ACP IV.
y
> Network Info
Function
[
S
E
] T
> Network Info
Function
[
]
Installing ACP IV
1
[ Network Info ]
IP
000.000.000.000
GW 000.000.000.000
MS 000.000.000.000
[
S
E
] T
MC 000000:00:00:00
DHCP NO
2
[ Function ]
S/W update
[
]
DB back up
DB recover
Data Logging
ACP_ID(DEMAND)
Language
Net Test
21
Hide quick links:
Advertisement
Table of Contents
