LG PACP4B000 Installation & User Manual page 35

Using dynamic IP using DHCP
For user to use the functions of the ACP IV through the web, a unique IP address may be assigned to
the ACP IV or dynamic IP setting may be used.
The next is how to set dynamic IP address.
Please proceed according to the order.
1.
Press [SET] button of the ACP IV. The following menu screen will be displayed.
• If you press [SET] button again, [Network Info] setting screen will be displayed.
• While DHCP is selected, if you press [SET] button, you can input whether to use DHCP
function.
PACP4B000
2.
Use up and down (▲, ▼) buttons to set whether to use DHCP function.
• When you press up (▲) button, DHCP function is set to use, and if down (▼) button is
pressed, DHCP is set for no-use.
3.
To use dynamic IP, set to use DHCP function.
PACP4B000
CAUTION
If dynamic IP type is used, the IP in use is returned by DHCP server and may not be able
y
to access the ACP IV.
In such case, you can check the newly set IP address in the front LCD of the ACP IV.
If you input the ACP IV IP address in the web browser, you can run the ACP IV program
y
again.
Network Info
>
Function
Click
[SET]
button
Click ▼
[Network Info]
button
MC
four times
> DHCP NO
Click
[SET]
button
NOT(0) / USE(1) : 0
NOT(0) / USE(1) : 1
Example of setting to use DHCP function
Installing ACP IV
000000:00:00:00
[Set DHCP]
[Set DHCP]
25