32
Installing ACP IV
2.
Press [SET] button of the ACP IV.
Select [Function] menu, and press [SET] button.
3.
4.
Select [DB back up] menu, and press [SET] button again.
Select [USB] or [SD card], and press [SET] button.
5.
6.
After completing backup, remove USB memory.
CAUTION
Before data backup is completed, turning off the power of the ACP IV or removing USB memory
or SD card may cause severe disorder of the ACP IV.
PACP4B000
Network Info
>
Function
Click
[SET]
button
S/W update
>
DB back up
DB recover
Click
[SET]
button
>
USB
SD card
Click
[SET]
button
Remove USB
memory or
SD card
[Function 1/3]
[DB back up]
[Completed]
Remove USB
or SD card