Self-Service Mode - Thermoplan Black & White BW3-CTMC Operating Instructions Manual

4 Operation, maintenance and cleaning

4.14 Self-service mode

The Self-service mode can be activated by a service technician and functions as follows:
The user interface still looks
perfectly normal after setting the
Self-service mode.
Display messages
Display messages are now
always shown with the message
"Please ask for assistance".
Restoring the function buttons
Enter PIN
111111
****
7 8 9
4 5 6
1 2 3
Enter the user menu to restore the
function buttons. Press and hold
"Ready" until the PIN input
window appears (PIN 111111).
© 2011 by Thermoplan, subject to change
Operating instructions BW3-CTMC + BW3-RF
The function buttons disappear
after a product has been dis-
pensed. The Self-service mode is
now enabled.
Hold down button until the
actual fault message appears
(approx. 5 seconds).
Exit the service menu right after
entering it (touch surface at left
top)
The actual display message is now
displayed (for details see section
"4.13 Display messages")
The function buttons are now
available again until the next
action (e.g. product dispensing,
cleaning) is performed.
37