28
Chapter 5
Command Parameters
Table 5-2 SRC6800+ Status Parameters
Command Path
Carrier Lock
FEC Lock
BER
EbNo (dB)
RX Level (dB)
Status > ASI
LOS
Standard
8b10b Errors
Sync Errors
Status > Ethernet
Link
RX Packets
TX Packets
RX Error Packets
MAC Address
Status > Sys
Software Version
Hardware Version
Manufacturing Date
Serial Number
Alarms
Command Path
Alarms
RF Loss of Signal
ASI Loss of Signal
Copyright © 2011, Harris Corporation
Description
Indicates if carrier lock has been achieved on the
selected RF interface.
Indicates if FEC lock has been achieved on the
incoming input signal.
Indicates the Bit Error Rate.
Indicates the EbNo level.
Indicates a Loss of Signal on the ASI input
interface.
Indicates the standard of the incoming ASI
stream.
Provides a count of ASI 8b10b errors.
Provides a count of ASI sync errors.
Indicates the state of the Ethernet's physical
connection.
Indicates the number of packets received in the
last second.
Indicates the number of packets transmitted in
the last second.
(Available in a future release)
Indicates the number of errored packets received
in the last second.
Displays the Ethernet MAC address.
Firmware revision number.
Indicates the hardware revision number.
Indicates the module's manufacturing date.
Indicates the module's serial number.
Description
This alarm indicates a loss of signal on the RF
interface.
This alarm indicates a loss of signal on the ASI
interface.
Options
Default
True, False
—
True, False
—
1e-6 to 1e-14
—
0.0 to 30.0 dB
—
-70 to -0
—
True, False
ASI-188, ASI-204,
—
unknown
Counter
—
Counter
—
lost, negotiating,
10h,10f, 100h,
—
100f, 100
Counter
—
Counter
—
Counter
—
MAC Address
—
#.#.#
—
1 to 32
—
yyyy-mm-dd
—
String
—
Options
Default
True, False
—
True, False
—