Table of Contents
Advertisement
1
SRC6800+ Module and
Interface
Overview
The SRC6800+ extracts either a Single-Program Transport Stream (SPTS) or an entire
Multi-Program Transport Stream (MPTS) from signals received through the unit's RF or ASI
inputs. The resulting transport stream is presented to external equipment through the
module's three ASI outputs.
When hard-wired to other 6800+ series modules in a 6800+ chassis, the SRC6800+ can
provide a complete satellite reception solution.
Product Description
The SRC6800+ Satellite Receiver and Demodulator is part of the 6800+ series of processing
and conversion modules. The SRC6800+ has the following features:
Demultiplexing
The SRC6800+ has the option to extract a single program transport stream from the
multiplex it receives. Program selection is accomplished through PMT program number
selection.
Unreferenced PIDs
When the SRC6800+ operates in Single-Program Transport Stream mode, up to four (4) PIDs
not referenced in the PMT can be specified for inclusion in the output transport stream.
RF Inputs
The active RF input is software-selected from up to four (4) incoming RF signals.
When used with an IPA6800+, these two modules provide a complete 'Satellite to Video
on IP' solution.
When used with an MFD6800+ these two modules provide a complete 'Satellite to
H.264 or MPEG-2 Video' Decode solution.
Copyright © 2011, Harris Corporation
1
Advertisement
Table of Contents
