10/100 BaseT Ethernet Interface
Use this interface to connect the SRC6800+ to a LAN for system control, status monitoring,
and firmware upgrades. A Category 5 cable of up to 100 meters in length may be used to
link the system to a hub. The (+) and (-) polarities must be wired correctly for proper
operation.
Table 1-3 10/100 BaseT Ethernet Pin Assignments
Pin
Signal
Transmit +
1
Transmit -
2
Receive +
3
4
—
—
5
Receive -
6
—
7
8
—
Figure 1-3 SRC6800+ 10/100 BaseT Ethernet Interface (RJ-45)
Signal Flow
Figure 1-4 SRC6800+ Signal Flow Diagram
Description
Transmit +
Transmit -
Receive +
No connection
No connection
Receive -
No connection
No connection
SRC6800+
Installation and Operation Manual
Copyright © 2011, Harris Corporation
7