Table of Contents
Advertisement
2
Chapter 1
SRC6800+ Module and Interface
ASI Outputs
ASI Input
10/100 BaseT Ethernet
Conditional Access
Copyright © 2011, Harris Corporation
The ASI signal produced by the SRC6800+ is duplicated onto three(3) separate interfaces.
The SRC6800+ can also receive one (1) ASI signal directly. As with the RF input, the
SRC6800+ can extract a single program from a transport stream multiplex and can provide
the resulting single-program transport stream on its three ASI outputs.
The Ethernet interface is provided for control. The SRC6800+ supports CCS, Telnet, and
HTTP control through this interface.
The SRC6800+ also includes a conditional access sub module for access control.
Conditional access can be enabled or disabled through a parameter setting. Common
interface (CI) descrambling is used to process encrypted content.
When Conditional Access is applied, protected streams can be decrypted by only those
decoders that have permission. Encrypted streams can be decrypted with BISS (presuming
the injected identifier and session word are configured).
Advertisement
Table of Contents
