Table of Contents
Advertisement
Table 5-1 SRC6800+ Configuration Parameters
Command Path
Configuration > Control
Password
Telnet
Clear Status
Load Defaults
Reset
Status Parameters
Table 5-2 SRC6800+ Status Parameters
Command Path
Status > Dmx
Transport Stream Present
Transport Stream Rate (Mbps) Indicates the transport stream rate.
Program Pres
CC Errors
Program Number
Program Name
Overflow Error Count
CAM card status
CAM card name
Status > RF [1–4]
Description
Specifies the password protecting the module's
control interfaces.
Enables/disables the module's Telnet interface.
Clears and resets all status parameters.
Enable - This value is a momentary state.
The module accepts this value, clears all
status values, and returns this parameter to
the 'disable' state.
Disable - This value is the typical state for
this parameter.
Loads factory default settings and resets module. Yes, No
Resets the module.
Description
Indicates whether a transport stream is present.
Indicates whether the selected program is
present in the transport stream.
Provides a count of continuity count errors.
Indicates the number of the program being
de-multiplexed.
Indicates the program name.
Provides a count of overflow errors.
Indicates the state of the Conditional Access
sub-system.
(Available in a future release)
Indicates the Conditional Access System ID.
SRC6800+
Installation and Operation Manual
Options
Default
31-char
admin
Enable
Enable, Disable
Enable, Disable
Disable
Yes, No
Options
Default
Present
Not Present
N/A
0.000 to 300.000
Mbps
Present
Not Present
N/A
Counter
Text String
Text String
Counter
Empty
Present
Recognized
Active
Error
Text String
Copyright © 2011, Harris Corporation
27
No
No
—
—
—
—
—
—
—
—
Advertisement
Table of Contents
