Module Description; Src6800+ Front Module - Imagine communications Selenio 6800+ Installation And Operation Manual

Module Description

SRC6800+ Front Module

Figure 1-1
Figure 1-1 SRC6800+ Front Module Card Edge Features
Table 1-1 SRC6800+ Front Module Card Edge Features
Feature
1 Module Status
LED
2 Ethernet Toggle
Switch
is a generic top-front view of the SRC6800+ module.
Description
Indicates the module's state of operation.
Off - The module is powered OFF. The module is not operational.
Green - The module is powered ON. The module is operating properly.
Red - The module is either booting or experiencing an error.
Red (blinking) - The module has booted in 'safe mode'. See 'Toggle Switch'
description below.
Amber - The module is booting.
This three-position toggle switch controls the card's IP address configuration.
Up (after boot) - Forces the IP address for HTTP and Telnet configuration and
control to 192.168.1.1
Up (during boot) - Forces the module into 'safe mode'.
See Firmware Upgrade
Center - The module operates using the configured IP address.
Down - Disables HTTP and Telnet access.
Installation and Operation Manual
for details.
SRC6800+
Copyright © 2011, Harris Corporation
3