Block Diagram; Configuration / Operating The Function Keys - PR PReasy 4116 Manual

bloCk diagraM

48
2-wire transmitter
Current
Voltage
Potentiome ter
Safety
ConfigUraTion /
oPeraTing The fUnCTion keys
Documentation for routing diagram.
in general:
When configuring the 4116, you will be guided through all parameters and you
can choose the settings which fit the application. For each menu there is a
scrolling help text which is automatically shown in line 3 on the display.
Configuration is carried out by use of the 3 function keys:
will increase the numerical value or choose the next parameter
1
will decrease the numerical value or choose the previous parameter
2
will accept the chosen value and proceed to the next menu
3
When configuration is completed, the display will return to the default state 1.0.
Pressing and holding will return to the previous menu or return to the default
3
state (1.0) without saving the changed values or parameters.
If no key is activated for 1 minute, the display will return to the default state
(1.0) without saving the changed values or parameters.
further explanations:
fast setpoint adjustment and relay test: These menus allow you to make a
quick setpoint change and relay test when the FastSet menu is activated.
This function can only be activated when the relays are set for setpoint
function and are controlled by a setpoint.
and simultaneously will activate a relay test and change the
Pressing
1 2
state of the relay.
Pressing will save the setpoint change.
3
Holding down for more than 1 second will return the unit to the default state
3
without saving the setpoint change.
Password protection: Programming access can be blocked by assigning a
password. The password is saved in the transmitter in order to ensure a high
degree of protection against unauthorised modifications to the configuration.
Default password 2008 allows access to all configuration menus.
49