Removing The Pe Sensor - Epson Stylus COLOR 440 Service Manual

EPSON Stylus COLOR 440, 640, and 740

4.2.4.9 Removing the PE Sensor

1. Remove the housing. (Refer to
2. Release the 2 hooks securing the PE sensor support to the frame.
Then remove the support by sliding it upward.
3. Remove the PE sensor and PE lever, if necessary.
During assembly, make sure that the tip of the sensor lever
C H E C K
P O I N T
fits through the hole of the right-most pinch roller.
Section 4.2.1.)
Chapter 4 Disassembly and Assembly
Figure 4-23. Removing the PE Sensor
113