EPSON Stylus COLOR 440, 640, and 740
Paper Feed Mechanism
When the ASF loads paper into the printer, the PF and pinch rollers
receive it. These rollers in turn move the paper across the platen,
where printing takes place, and feed it out through the eject rollers. The
top eject roller is notched and set back from the lower eject roller at a 5-
degree angle toward the platen. This compensates for paper curl and
allows the trailing (top) edge of the paper to pass under the printhead
without bending.
Figure 2-9. Paper Feed Mechanism
2.1.7 Ink System
The ink system consists of the following:
ink cartridge
printhead capping mechanism
carriage lock
cleaning blade
ink pump
waste ink drain pad
Although the PF motor drives both the paper feed mechanism and the
ink pump, the gear linkage contains no special mechanism to
disengage these systems. However, this does not mean the pump is
always pumping ink. For the ink pump to operate, the printhead must
be capped by the capping mechanism (to create a vacuum seal) and
the PF motor must turn the pump in the appropriate direction (to engage
the pump drive rollers).
Figure 2-10. Ink System Mechanism
Chapter 2
Operating Principles
43