Epson Stylus COLOR 440 Service Manual page 93

Hide thumbs Also See for Stylus COLOR 440:
Table of Contents

Advertisement

EPSON Stylus COLOR 440, 640, and 740
Symptom
Condition
Printing is not
The carriage moves,
performed.
but no printing is
performed.
Abnormal paper
Paper does not feed.
feeding.
Printer stops during
Fatal error appears.
initialization.
Table 3-7. Repair of the Printer Mechanism (continued)
Cause
Head FFC is loose.
The FFC is defective.
Ink cartridge is defective.
Printhead is defective.
PF roller experiencing
friction with bushing or with
adjacent parts.
Abnormal operation of the
auto-sheet feeder.
Malfunctioning ASF
transmission.
ASF sensor is defective.
PE sensor is defective.
HP sensor is defective.
Printhead FFC is
disconnected.
CR motor is defective.
PF motor is defective.
Checkpoint
Check for proper connection.
Check the FFC by using a tester. Also,
examine visually for burn marks.
Install a new cartridge and perform the self-
test.
If the condition does not improve even after
performing two or three cleaning cycles,
replace the printhead and perform the self-
test.
Check if the PF roller rotates when paper is
not fed.
Check movement of the ASF by hand.
Check to see if the transmission gears
rotate. Push against the sheet feeder clutch
and check to see if the gears mesh
properly.
Check the signal level of the ASF sensor.
(See
Table
3-2.)
Check the signal level of the PE sensor.
(See
Table
3-2.)
Check the signal level of the HP sensor.
(See
Table
3-2.)
Check if the FFC is disconnected.
Check that the CR motor cable is
connected.
Check that the PF motor cable is
connected.
Chapter 3 Troubleshooting
Solution
Connect the FFC properly.
Replace the FFC.
Replace the ink cartridge.
Replace the printhead.
Clean the PF roller by using a
cleaning sheet. Replace the PF roller
if it does not recover.
Replace ASF.
Replace the gears or the
transmission mechanism.
Replace ASF sensor.
Replace PE sensor.
Replace HP sensor.
Reconnect the FFC.
Replace the CR motor if there is no
problem with the cable connection.
Replace the PF motor if there is no
problem with the cable connection.
84

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus color 640Stylus color 740

Table of Contents