Removing The Front Panels - Epson Stylus COLOR 440 Service Manual

EPSON Stylus COLOR 440, 640, and 740

4.2.3 Removing the Front Panels

1. Remove the housing. (See
2. Remove 1 screw (No.1) to detach the left panel housing. Note that
the paper output tray will come loose with the panel housing.
3. Take out the 2 screws (No.1) securing the control panel and remove
the control panel from the printer mechanism.
4. Disconnect the FFC from the connector on the C206/209 PNL
board.
5. Remove the 2 screws (No.3) securing the panel board assembly
and remove C206/209 PNL board from the panel assembly.
Section 4.2.1.)
Chapter 4 Disassembly and Assembly
Figure 4-5. Removing the Front Panels
94