Removing The Pe Sensor - Epson LQ-300 Service Manual

Removing the PE
3.2.4.4
1.
Remove the printer mechanism (see Section
Remove the platen (see Section3.2.4.3)-
2.
3. Release the friction shaft of theupperpaper Wide from the clips on the right and left frame.
4. Remove the upper paper guide from the right and left frame.
Spring
Left Frame
\
0
5. Release the 2 clips securing the PE sensor and remove it.
Sensor
3.2.4).
1
Figure 3-12. Removing the PE
PE Sensor
Figure 3-13. Wiring of the
Disassembly and Assembly
' \
PE Sensor
Sensor
mess
Upper Paper Guide
PE Harness
Friction Shaft
Frame
3-13