Epson Stylus COLOR 440 Service Manual page 137

EPSON Stylus COLOR 440, 640, and 740
Resetting the protection counter
1. Follow steps 1 through 3, above, to get to the protection counter
menu screen.
2. Select Clear the protect counter value. The screen shown below
appears. It reminds you to replace the waste ink pad when resetting
the counter.
Figure 5-17. Protection Counter Confirmation Screen
3. Select Already replaced. The screen shown in Figuure 5-18
appears, indicating that the protection counter has been reset.
NOTE: If you select "Have not replaced," the adjustment
program does not advance beyond the current screen
(Figure 5-17).
Figure 5-18. Resetting the Protection Counter
Be sure to replace the waste ink pad with a new one
C A U T I O N
when you reset the protection counter.
Chapter 5 Adjustments
128