Menu Items; Picture Menu - Mitsubishi Electric XD550U User Manual

Menu operation (continued)

Menu items

Set the following items provided in the respective menus.

Picture menu

ITEM
Image
Brightness
Contrast
Color Temp.
Color Management
Aspect Ratio
Input Level
3D
3D Sync Invert
• When the Gamma setting in the Image User menu is changed, images in the Black Board or White Board setting may not be
displayed correctly.
• When White Board is selected, BrilliantColor™ in the Image User menu cannot be used. Additionally, Theater in the Image User
menu has no effect and is automatically canceled when White Board is selected.
• You cannot adjust Color Temp. when Image is set to Black Board or White Board.
• When Image is switched, projected images may be distorted.
Image
Brightness
Contrast
Color Temp.
Color Management
Aspect Ratio
Input Level
3D
3D Sync Invert
Adjust
Select
SETTING FUNCTION
Auto Automatically sets an optimal color balance based on the input signal. Use
this setting for most cases.
Theater Makes projected images soft and smooth. Best suited for movies.
Presentation Makes projected images bright and crisp.
Standard Makes projected images look natural.
Reproduces natural color tones when images are projected directly onto a
Black Board
black board.
Reproduces natural color tones when images are projected directly onto a
White Board
white board.
User Adjusts the gamma curve, color intensity, or balance. (See page 31.)
±30 Adjusts the brightness of projected images. (See page 30.)
±30 Adjusts the contrast of projected images. (See page 30.)
4 options Adjusts the color temperature. (See page 30.)
User Use to adjust the color temperature to a desired value. (See page 30.)
Red You can change to any desired color by adjusting each of Gain, Saturation
/ Green /
and Hue of six different colors. (See page 31.)
Blue / Cyan /
Yellow / Magenta
Normal Automatically sets the aspect ratio in relative to the input signal. Use this
setting for most cases.
16:9 Selects a desired screen position for anamorphically squeezed or horizontally
compressed images stored on DVD disks.
You can select from Center, Upper, and Lower by pressing the ENTER button.
Full Select this setting when you want to project images in the full screen.
Auto / For HDMI signal input:
Normal /
Enhanced
(See page 13.)
On / Off Set to On/Off of 3D display.
On / Off Switches the order of the image for left eye and for right eye.
Picture
Auto
Mid
Red
Normal
Auto
Off
Off
Exit
MENU
Auto
: The proper setting is automatically selected.
Normal
: Select when grayish black occurs.
Enhanced : Select when solid black occurs.
EN-22
0
0