Table of Contents
Advertisement
Logs Page
Click the Logs link at the top of any of the main web pages to access the page shown in
command log that lists all TCP and UDP messages the unit receives. It also displays the web browser's IP address and gives you
options to Refresh and Reset Logs. When in need of assistance from tech support, use the Debug Log section to capture
information useful for troubleshooting. Simply click Start Debug Log, wait at least one minute, and click End Debug Log to create
the file. You can then download and send it to AMX support.
Logs Page
FIG. 56
NOTE: For security reasons, only use the Enable Maintenance Mode if instructed to by SVSI/AMX Technical Support.
LLDP Page
Click the LLDP link at the top of any of the main web pages to access the page shown in
information from the Link Layer Discover Protocol (LLDP) packet which identifies the port number and switch the device is
connected to.
LLDP Page
FIG. 57
N2151/N2251 User Manual
Decoder Configuration Options
Figure
56. The Logs page displays a
Figure
57. The LLDP page displays
60
Advertisement
Table of Contents
Troubleshooting
