Security Page
Click the Security link at the top of any of the main web pages to access the page shown in
HTTPS connections and set up a password for stream encryption. To successfully display an encrypted Encoder stream on a
Decoder, the Decoder must match the Encoder password.
NOTE: This page only applies if connected to a web page via HTTPS.
Security Page
FIG. 53
Security Page Options
TABLE 28
Option
General Security
Command Port Security
N2151/N2251 User Manual
Description
This section allows you to force HTTPS connections and set up a default password for stream
encryption. To successfully communicate, the Decoder must know and match the Encoder password.
This section allows you to secure the port connections for TCP port addresses 50101, 50102, and
50104. These ports are always
the Decoder will only accept commands through the secure ports.
• 50101 is secure version of 50001.
• 50102 is secure version of 50002.
• 50104 is secure version of 50004.
secure and require an SSL connection. When Secure Ports Only is enabled,
Decoder Configuration Options
Figure
53. This page allows you to force
57