Kvm Page - AMX NMX-ENC-N2151 Instruction Manual

KVM Page

Click the KVM link at the top of any of the main web pages to access the N-Series KVM page. You must check the USB Enable box at
the top to see the page shown in
KVM Page
FIG. 54
KVM Page Options
TABLE 29
Option
USB Enable
Permission Level
Connect to Encoder IP
Address
KVM Advanced Settings Enable to access the KVM Encoders list.
KVM Encoders
Import KVM CSV
N2151/N2251 User Manual
Figure 54. See Table 29
Description
Enable to allow the ability to share mouse and keyboard over the network. Enabled by default. When disabled,
the unit works like a non-KVM unit and ignores any keyboard or mouse activity.
Set the permission level for the Decoder. Decoders can only establish USB connection to Encoders with the
same or higher permission level. See the section
page 22 for more information.
Enter the IP Address of an active Encoder. Use the Switch and Disconnect buttons to control the connection.
View/edit the list of Encoders associated with this Decoder. Here you can Add new/overwrite Encoders to the
list by Name or IP Address as well as assign Passwords. You can also end the Decoder/Encoder association by
clicking the Remove button. Intended for use when different passwords are assigned to Encoders in your
system.
Click the Choose File button and browse to the KVM CSV file on your computer that you would like to use to
configure the unit. Then click Upload. For more information, see the section
Security Features) on page 22.
for option descriptions.
Advanced KVM Setup (With Added Security Features)
Decoder Configuration Options
on
Advanced KVM Setup (With Added
58