Encoder Setup Section - AMX NMX-ENC-N2151 Instruction Manual

Encoder Setup Section

The Encoder Setup section of the Settings page is shown in
Encoder Setup Section
FIG. 21
Settings Page: Encoder Setup Section
TABLE 1
Option
Device Name
TX Enable
Compressed Stream
Uncompressed Stream
N2151/N2251 User Manual
Description
Enter a user-friendly name for the unit.
Enable to generate and transmit multicast streams.
View/edit the current transmit compressed stream
number. Enable the port you wish to transmit the stream
on (P0 or P1).
View/edit the current transmit uncompressed stream
number. Enable the P1 checkbox if you want the unit to
output an uncompressed stream.
Figure 21. Options are described in
Notes
More descriptive names in this field help you organize
and manage the N-Series system efficiently. Names
based on the unit's location and function are very
useful. Some good examples are Lobby-Left-VGA (for
left side of lobby, VGA input) or CR201-HDMI (for
Conference Room 201, HDMI input). Keep in mind the
matrices are organized alphanumerically. Avoid using
special characters.
To better understand this setting, think of Encoders
more like a channel on a cable box, rather than a
traditional AV Matrix. Each Encoder must have a
unique stream number, just like every channel must
have a unique channel number (e.g., Food Network
and HGTV cannot both be on channel 201).
P1 can stream both compressed and uncompressed,
and it can do so simultaneously. If you prefer to use
compressed video and disable uncompressed (so as
not to overwhelm the network) disable this P1
checkbox.
Encoder Configuration Options
Table 1.
26