MG MG6 Owner's Handbook Manual page 46

indicator illuminates as a system check when the ignition is
in position Ⅱ and should extinguish after a few seconds.
If a non-emissions related fault occurs while the vehicle is
being driven, the indicator will illuminate and the message
Check Engine
will appear in the message centre. Seek
an MG Authorised Repairer urgently.
Malfunction Indicator Lamp Warning - Yellow
This warning light is used to indicate an emission related
fault is detected by the engine management system. The
indicator illuminates as a system check when the ignition
is in position Ⅱ and should extinguish when the engine is
started.
If an engine operation problem occurs while the vehicle is
being driven, the indicator will illuminate and the message
Engine Fault
will appear in the message centre. Seek an
MG Authorised Repairer urgently.
INSTRUMENTS AND CONTROLS
Electronic Hydraulic Power Assisted Steering
(EHPAS) / Electronic Steering Column Lock
(ESCL) / Steering Angle Sensor (SAS) Warning-
Red
This red warning light will illuminate for a few seconds as a
lamp check when the ignition is in position Ⅱ.
The warning light is used to indicate to the driver that a
fault exists in electronic hydraulic power assisted steering
or electronic steering column lock system or steering angle
sensor.
If EHPAS has a fault, the warning light will illuminate and
the message centre will display
Seek an MG Authorised Repairer urgently.
If ESCL has a fault, the warning light will illuminate and the
message centre will display
Seek an MG Authorised Repairer urgently.
If SAS has a fault, the message screen will display
Fault
. If SAS is not calibrated, the message screen will
Power Steering Fault
Steering System Fault
SAS
31
1
.
.