MG MG6 Owner's Handbook Manual page 217

MAINTENANCE
battery of the same type and specification as the original
to maintain the correct vehicle functionality.
Before disconnecting or removing the battery, ensure that
the starter switch and all electrical equipment is turned off.
Disconnect the negative (-) cable first and then the positive
(+) cable (when reconnecting, connect the positive cable
first and then the negative cable).
When lifting the battery from the car， keep the battery
upright at all times.
Make sure both the battery clamping plate and retaining
strap are fitted securely, this will prevent the battery from
moving in the event of an accident or sudden stop.
Note: To maintain the correct functionality of
， ， ，
Stop/Start the battery sensor requires resetting
after battery replacement.
Authorised Repairer to reset the battery sensor, it
takes 4 hours at least for the sensor to get the exact
status information of the battery. Failure to adhere
to the above will inhibit the stop/start functionality.
202
Please consult an MG
Used batteries
environment ， must be disposed of using an approved
method . They should be recycled by a professional
company. Please consult an MG Authorised Repairer for
more details.
can be harmful to the