Virtual Device; Pid - ICP DAS USA UA-5000 series User Manual

3.4. Virtual Device

This Virtual Device function allows the user to simulate various devices with the real I/O by using
the PID tuning function. This article includes the PID function.

3.4.1. PID

This section will show you the way to add, modify, and delete the virtual PID device in the PID
page. Proportional-Integral-Derivative control is the most widely used in industrial control systems.
A regulator which is controlled in accordance with Proportional, Integral and Derivative is called
PID contol for short, also called PID regulator. When the user cannot fully grasp or measur
parameters of the control system, the PID regulator is the best solution.
Description of the tool button:
: Add a task, command, or item.
: Delete a task, command, or item.
: Modify a task, command, or item.
1. Configure a task in the PID Device page.
The settings:
Function items
PID Name
Description
Give a PID task name.
UA-5000 Series User Manual V.1.0.0
52
ICP DAS
Default
Task1