The Heat Setting; Switching The Outer Rings On And Off; Automatic Heat Up - AEG HK654070XB User Manual

Automatic Switch Off times
Heat setting
Stops after

The heat setting

Touch the control bar at the heat setting.
Change to the left or the right, if it is neces-
sary. Do not release before you have a correct
heat setting. The display shows the heat set-
ting.
/

Switching the outer rings on and off

You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field
more outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.

Automatic Heat Up

You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the graphic),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
2. Immediately touch the necessary heat setting. After 3 seconds
display.
To stop the function change the heat setting.
EURO Appliances - euappliances.info
-
6 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
( comes on in the display).
Operating instructions
- -
5 hours 4 hours
/ . The indicator comes on. For
21
-
1.5 hours
A
comes on in the