Table of Contents
Advertisement
3
When an individual cooking zone or the entire hob is switched off, any
residual heat is shown with an h (for "Hot") in the digital display for
the appropriate cooking zones.
Cooking Zone Selection
To select the required cooking zone touch the corresponding sensor
field for approx. one second.
A zero with a decimal point will light up in the appropriate cooking
zone display window 0.
3
The decimal point indicates that settings may only be made for this
cooking zone.
Heat Setting Selection
For setting and adjusting the heat setting (1 to 9) for the selected
cooking zone.
Use sensor field + to increase the heat setting.
Lower the heat setting with sensor field -.
57
Advertisement
Table of Contents
