Fatal Error Messages - Panasonic PanaXSeries MN1030 Series User Manual

Chapter 13 Error Messages

13.3.3 Fatal Error Messages

3500
No memory space.
There is insufficient memory.
Make sure that there is sufficient memory capacity available
3501
fileneme: Cannot open file.
The specified input file does not exist.
Check the disk for the file.
3502
filename: Cannot read file.
There is an error with the input file.
Reassemble the corresponding source file and check the disk for hardware errors.
3503
filename: Cannot read parameter-file.
There is an error in the parameter file.
Make sure that the parameter file exists and has the proper access permissions. If it passes both
tests, check the file for illegal characters.
3504
Object file not specified.
There is no object file (with extension .rf) specified as an input file.
Make sure that the object file is properly specified.
3505
filename: This file is not a object file for MN1030
The input file is not a relocatable object file.
Check the file name specification for errors.
3506
filename: This file is not a library file for MN1030
The input file is not a library file.
Check the file name specification for errors.
3507
filename: Invalid file information type.[type]
There is a problem with the specified file.
Reassemble the corresponding source file and check the disk for hardware errors.
3508
filename: Bad file search.
There is a problem with the specified file.
Reassemble the corresponding source file and check the disk for hardware errors.
3509
filename: Illegal section attribute.
A section attribute in the specified input file is invalid.
Reassemble the corresponding source file and check the disk for hardware errors.
3510
filename: Invalid symbol detail information type.[type]
The symbol detailed information in the specified input file is invalid
Reassemble the corresponding source file and check the disk for hardware errors.
3511
filename: Cannot make output-file.
There is a problem creating the output file.
Check the file system capacity and other factors affecting file creation.
262 Linker Errors