Panasonic PanaXSeries MN1030 Series User Manual page 319

MAIN.ASM(5):Error 2304: Instruction not found.
MAIN.ASM(7):Error 2306: Multiple define symbol.
The following explanation is for the programmer's editor MIFES. Start up MIFES and open two files.
MI MAIN.ASM ERROR
The contents of the file ERROR will be displayed on the screen.
MAIN.ASM(5):Error 2304: Instruction not found.
MAIN.ASM(7):Error 2306: Multiple define symbol.
Tag jumps
The first error message matches this display on the screen.
MAIN.ASM(5): Error 2304: Instruction not found.
This line works with tag jumps regardless of the character position on screen.
Look at the display of function key F10 on the CRT screen. It should be [Tag JP]. This key specifies a
tag jump, so try pressing F10. The screen will switch, and the cursor will be placed at the source file
statement in which the error was detected
.
_CODE
data
main
main
Fix errors
The cursor will be located on the fifth line. Fix the error here.
Change move to mov. That alone fixes the line. Switch the screen again to the error file.
5
7
Errors: 2 Warnings: 0
5
7
Errors: 2 Warnings: 0
section CODE, PUBLIC, 1
equ -1
mov 0x11, D0
move 0x11, D0
mov D0, (data)
end
Chapter 16 Notes on the Operating Environment
move 0x11, D0
main
(MAIN.ASM)
move 0x11, D0
main
(MAIN.ASM)
Personal Computer Versions 307