Table of Contents
Advertisement
LCD Display Descriptions
I Default Status (LCD Display
After Login)
MON
0032 Unit:01
q Monitor number
The number of connected monitor is displayed.
w Unit number/Status
The number of connected site will be displayed.
e Camera number
The number of selected camera is displayed.
r Input number/Recorder number/Status
The numeric input, selected recorder number, or status
is displayed.
I Blinking
In this document, grayed (greyed) areas on the LCD illus-
trations mean blinking.
∗ MON Prohibit
0001 Unit:01
Blinking
I Messages Displayed on the
LCD
The following are examples of LCD display after login.
Note: Some parts of LCD displays, described on this docu-
ment, may differ from the actual status.
G Invalid
MON Invalid
0001 Unit:01
54
CAM
>00512
CAM
00001
CAM
00001
This message is displayed in the following circumstances.
• When you have entered a wrong user ID or password,
etc.
• When you have entered a camera number or monitor
number, etc. that is not existing.
G Busy
• When a selected monitor is controlled by a higher-level
user, "∗" blinks on the LCD. (You cannot control the
monitor.)
• When a selected camera is controlled by a higher-level
user, "∗" blinks on the LCD. (You cannot control the
camera.)
• To cancel the Busy status, select another monitor, cam-
era, or wait until "∗" goes out.
∗ MON Prohibit
0001 Unit:01
"Busy" status is activated for a monitor.
MON Prohibit
0001 Unit:01
"Busy" status is activated for a camera.
G Prohibit (Prohibited)
MON Prohibit
0001 Unit:01
• When you have tried an operation not authorized by the
system unit, "Prohibited" is displayed on the LCD.
• When you have forgotten to select a monitor before
selecting a camera, "Prohibited" is displayed on the
LCD.
• After a few seconds, the LCD display will return to the
default status.
CAM
00001
CAM∗
00001
CAM
00001
Advertisement
Table of Contents
