File Conversion Utility - Panasonic PanaXSeries MN1030 Series User Manual

Chapter 1 Getting Started
1.6

File Conversion Utility

This file conversion utility converts an EX format file produced by the linker into a file in Intel HEX
format, or Motorola S format.
General command format
The general command format used to start the file conversion utility is shown below.
excv103 [options] EX format file name
Contents of brackets [ ]may be omitted.
Options
Option
-j
-e
-h
-w
-i
-S3
-S2
S1
-ofile
-p
-P
-R start address,
end address
-A start address
*1 Option for UNIX version.
*2 Option for DOS/V version
10 File Conversion Utility
Displays error and warning messages in Japanese. *1
Displays error and warning messages in English. *2
Displays help information regarding file conversion utility options to the screen.
Perform conversion using a work file during execution. This enables a large amount of
data to be converted even if the personal computer has little memory. However,
conversion speed will be slower.
Output the execution file in Intel HEX format.
Output the execution file in Motorola S3 format.
Output the execution file in Motorola S2 format.
Output the execution file in Motorola S1 format.
Specify the file name to output
No padding.
Padding.
Converts the addresses within the specified range.
If omitting the end address, a conversion is performed until the last address of the
execution module.
Perform conversion for the starting address of EX format file into the specified
address.
Description