Speedtouch™610 Ftp Access - THOMSON SpeedTouch 610 Operation And Maintenance Manual

Business dsl routers release r4.2

Hide thumbs Also See for SpeedTouch 610:

Table of Contents

8 SpeedTouch™610 FTP Access

Introduction

Opening an FTP session

to the

SpeedTouch™610

E-SIT-CTC-20030324-0002 v1.0

The SpeedTouch™610 permanent storage exists of nonvolatile memory responsible for

storing, retrieving and maintaining the SpeedTouch™610 system software files, configu-

ration profile files, language-pack files, software activation keys, secure storage files, etc.

The permanent storage of the SpeedTouch™610 is accessible via the well known File

Transfer Protocol (FTP). This allows to backup and restore files present on the Speed-

Touch™610 permanent storage. Moreover, via FTP's quote site command you are able

to execute a limited set of CLI commands from the FTP prompt.

The items discussed in this chapter are also valid via SpeedTouch™610's

Note

remote management capabilities.

For more information, see the application note "SpeedTouch™610

Management".

Proceed as follows to open an FTP session to the SpeedTouch™610 permanent storage

(the example shows an ftp session opened from an MS Windows Command Prompt:

In the example above the default SpeedTouch™610 IP address 10.0.0.138 is

Note

assumed, however another IP address may be assigned to your Speed-

Touch™610 device.

In its default firewall configuration, FTP access to the SpeedTouch™610 permanent

storage is restricted to access from the local network only.

8 SpeedTouch™610 FTP Access

Remote

Table of Contents