Resetting The Speedtouch™610 - THOMSON SpeedTouch 610 Operation And Maintenance Manual

9 Resetting the SpeedTouch™610
Introduction
Important Note
E-SIT-CTC-20030324-0002 v1.0
Due to the flexible nature of the SpeedTouch™610 and its configuration, you may end
up in a situation where restoring the defaults is the only possible solution.
Or, you might decide to start a re-configuration of the SpeedTouch™610 with a clean
slate to avoid surplus configurations that may cause redundancy and ambiguity or even
have a negative influence on the SpeedTouch™610 services to your network.
The SpeedTouch™610 offers various tools to cope with these situations.
Depending on your ISP's or network administrator's preferences, your
Note
SpeedTouch™610 may have a deviant default configuration after resetting
the device.
Before you start with resetting the SpeedTouch™610 configuration, make sure:
•
To inform all people relying on the SpeedTouch™610 services, that service may be
down for some period.
•
The latest backup configuration is stored on your local disk to restore the config-
uration if needed.
See " Backing up saved configurations" on page 32
tions via FTP" on page 38
9 Resetting the SpeedTouch™610
and
for more information.
"5.3.1 Back up Configura-
61