3 SpeedTouch™610 System Software
3.3 System Software Management via FTP
FTP access
For more information on the SpeedTouch™610 permanent storage and how to access
it via FTP, see
"8 SpeedTouch™610 FTP Access" on page
57.
SpeedTouch™610
The SpeedTouch™610 permanent storage consists of two subdirectories: '/active' and '/
system software
dl'.
locations
In the '/active' subdirectory the currently running system software (the active software
version) is stored. The '/dl' subdirectory stores the dormant system software (the
passive software version).
In case no SpeedTouch™610 system software upgrade was performed before, both
active and passive software will be the same.
Full read/write access is only granted in the '/dl' subdirectory.
Note
E-SIT-CTC-20030324-0002 v1.0
19