HP 1820 Management And Configuration Manual page 72

Link Layer Discovery Protocol (LLDP and LLDP-MED)
LLDP-MED Remote Device Summary
Field
Network Policy Information
This section describes the information in the network policy TLVs received in the LLDP-MED frames on this interface.
Media
Application Type
VLAN ID
Priority
DSCP
Unknown Bit
Status
Tagged Bit Status
Inventory Information
This section describes the information in the inventory TLVs received in the LLDP-MED frames on this interface.
Hardware
Revision
Firmware
Revision
Software
Revision
Serial Number
Manufacturer
Name
Model Name
Asset ID
Location Information
This section describes the information in the location TLVs received in the LLDP-MED frames on this interface.
Sub Type
Information
Extended PoE
This section describes whether the remote device is advertised as a PoE device.
Device Type
7-14
Description
The media application type received in the TLV from the remote device. The application types
are unknown, voicesignaling, guestvoice, guestvoicesignalling, softphonevoice,
videoconferencing, streammingvideo, vidoesignalling. Each application type that is transmitted
has the VLAN ID, priority, DSCP, tagged bit status and unknown bit status.
The port on the remote device may transmit one or many such application types. This information
is displayed only when a network policy TLV has been received.
The VLAN ID associated with a particular policy type.
The user priority associated with a particular policy type.
The Differentiated Services Code Point value associated with a particular policy type.
The unknown bit associated with a particular policy type.
Identifies whether the network policy is defined for tagged or untagged VLANs.
The hardware version advertised by the remote device.
The firmware version advertised by the remote device.
The software version advertised by the remote device.
The serial number advertised by the remote device.
The name of the system manufacturer advertised by the remote device.
The name of the system model advertised by the remote device.
The system asset ID advertised by the remote device.
The type of location information advertised by the remote device.
Coordinate Based
• —The location map coordinates (latitude, longitude and altitude) of the
device.
Civic Address
• —The civic or street address location of the device.
ELIN
• —The Emergency Call Service (ECS) Emergency Location Identification Number
(ELIN) of the device.
The text description of the location information included in the subtype.
If the remote device is a PoE device, this field identifies the PoE device type of the remote device
connected to the port.