Viewing Poe Port Details - HP 1820 Management And Configuration Manual

Viewing PoE Port Details

To view additional PoE configuration information for a port, select the port and click Details.
Figure 8-3. PoE Port Details Page
Table 8-4. PoE Port Details Fields
Field
Interface
High Power
Max Configurable
Power
Class
Output Voltage
Output Current
Output Power
Temperature
Description
The port number.
Indicates whether high-power mode is enabled or disabled. When enabled, the port supports
the the PoE+ power standard, which allows for providing up to 30W of power. When
disabled, the port supports the original PoE standard only, which allows for providing up to
15.4W of power.
Power Limit Type
If the for the port is User (user-defined), this field displays the
configured power limit. If the Power Limit type is set to
If the Power Limit Type is set to Class, this field displays the class of the connected device,
as learned in LLDP messages. Possible values are Unknown and Class 0 through Class 4. A
higher class value indicates that the device requires higher power.
The voltage being applied to the connected device.
The current in milliamps being drawn by the powered device.
The power in watts being drawn by the connected device.
The temperature measured at the PoE port.
Power Over Ethernet
PoE Port Configuration
Class
, then Class displays.
8-5