Port; Mask; Gateway; Dns - urmet domus DRV-065S-066S Quick Manual

eIMPORTANT NOTE
It is advisable to assign a static IP address to the device.
2.3.1.2

Port

This menu option is used to set the port number used for image transmission. The entered number must be higher than 2000.
The default setting is 8000.
Press "EDIT" and use number keys 0y9 to enter the port number. Use "
"ENTER" to confirm or "ESC" to cancel.
2.3.1.3

Mask

Use this option to set the subnet mask of the device.
Press "EDIT" and use number keys 0y9 to enter the mask number. Use "
"ESC" to cancel.
2.3.1.4

Gateway

This option can be used to set the gateway of the device.
Press "EDIT" and use number keys 0y9 to enter the address. Use "
cancel.
2.3.1.5

DNS

This option can be used to set the DNS of the device.
Press "EDIT" and use number keys 0-9 to enter the address. Use "
cancel.
A dynamic IP address is obtained if the device uses a PPPoE function.
If DNS is set with a fixed internet IP address, the device will send the following information to the IP address:
name of the DVR
¾
serial number of the DVR
¾
current IP address of the DVR
¾
The DNS server with the fixed address may receive information on the DVR and use the information to solve the DVR dynamic
IP.
2.3.1.6

Http port

This option can be used to set the port number used for the Internet Explorer browser. The default setting is 80.
Press "EDIT" and use number keys 0-9 to enter the port number. Use "
"ESC" to cancel.
2.3.1.7

E-mail

This item is used to set the parameters for alarm notification via email (up to 2 addresses).
2.3.1.8

PPPoe

This option is used to enable PPPoE dial- up functions.
To enable, select the respective check box using "
Symbol "9" indicates that the PPPoE function is enabled; symbol "×" indicates that it is not.
The following can be defined after enabling the "PPoE" option:
user
¾
password
¾
verify
¾
This option is used to enter the user name for PPPoE authentication.
The user name may consist of up to 32 characters.
This option is used to enter the password for PPPoE authentication.
The password may consist of up to 14 characters.
This option is used to enter the password again for PPPoE authentication.
DS1093-024
" to shift the cursor. Press "EDIT" to delete. Press
" to shift the cursor. Press "ENTER" to confirm or
" to shift the cursor. Press "ENTER" to confirm or "ESC" to
" to shift the cursor. Press "ENTER" to confirm or "ESC" to
" to shift the cursor. Press "ENTER" to confirm or
" and press "ENTER" or "EDIT".
User
Password
Verify
40