Brightness; Menu Trasparency; Vga Resolution; Date / Time - urmet domus DRV-065S-066S Quick Manual

Table of Contents

Advertisement

Available languages

Available languages

2.1.1.7

Brightness

This option can be used to vary the OSD menu brightness. Use "
2.1.1.8

Menu trasparency

This option can be used to vary the OSD menu transparency level.
" to select. Possible selections: "1:1", "3:1", "1:3"and "No Trans".
Use "
3:1 indicates that the OSD prevails (by approximately three times) over the previous display; 1:3 indicates the opposite.
2.1.1.9

VGA resolution

This option is used to set resolution and refreshing frequency of the VGA video output (used to connect the DVR to the VGA
monitor).
Use "
" to select.
Possible selections: "800x600/60Hz", "800x600/75Hz" and "1024x768/60Hz".
2.1.1.10

Date / time

This option is used to set the current date in day/month/year format and to set the current time in hour/minute/second format.
Press "
" to select the day, month, year and hours, minutes, seconds.
Use the number keys 0y9 on the front panel to enter the date.
This option is used to automatically set time changes (to and from summer saving time).
When the "ORA LEGALE" is on, the clock will be automatically set back by one hour when winter time comes into effect, while it
will be automatically set forward by one hour when summer saving time comes into effect.
Press "ENTER" to access the submenu. Symbol "9" in the check box indicates that the setting is enabled; symbol "×" indicates
that it is not.
Press "
" to go from one submenu option to another and press "
the changes effective.
After confirming the setting, in live and play modes, letter "E" or "I" will appear by the side of the date/time indicating summer
(when summer saving time is applied) or winter (when it is not) as shown below:
2.1.1.11

Preview

This menu is used to set camera display mode (
(display, switching time, audio presence and channel arrangement).
Position the "Active Frame" on the "Preview" icon and press "ENTER".
DS1093-024
" to select.
" to set. Select "CONFIRM" and press "ENTER" to make
Figure 22: date/time menu
main/auxiliary monitor
) after the device is switched on, i.e. in LIVE mode
35
22-11-2006 WED 11:35:00 (I)

Advertisement

Table of Contents
loading

Table of Contents