Pre Rec; Post Rec; Copy To Camera; Network Menu - urmet domus DRV-065S-066S Quick Manual

2.2.1.12

Pre REC

The recording will contain the video feed prior to the alarm for the set time in the event of a motion detection or external alarm
event.
Possible options are: "Nr.", "5s", "10", "15s", "20", "25", "30" and "Max".
Use " " to select.
Select "Nr." for no "pre-recording".
2.2.1.13

Post REC

The recording will contain the video feed following the alarm for the set time in the event of a motion detection or external alarm
event.
Possible options are: "5s", "10", "30s", "1Min", "2Min", "5Min" and "10Min".
Use " " to select.
2.2.1.14

Copy to camera

Select "Copy to camera" to select on which cameras to copy the following settings:
resolution
x
bit rate
x
frame rate
x
enable rec - schedule
x
Select "all" to copy the settings on all cameras. Select "Copy" and press "ENTER" to copy the settings. Confirmation of the
operation will be required: press "ENTER" again to confirm.
2.3

NETWORK MENU

Description
¾
Use this menu to configure the DVR according to the parameters of the Ethernet network to which it is connected.
Position the "Active Frame" on the "NETWORK" icon and press "ENTER".
eIMPORTANT NOTE
The default IP address of the DVR is: 192.0.0.64. Use this menu to assign to the DVR an IP address which is not used
¾
in the network by other devices to prevent conflicts.
Connect the DVR to the network after having correctly configured the IP address.
¾
The following window will appear:
This page contains the basic menu settings.
Select "ADVANCED SETTINGS" and press "ENTER" to access advanced settings.
The selected item is highlighted.
Press arrows " " to point the cursor to the various menu items.
Point the cursor to the required item and press "ENTER" to edit it. Use buttons "
selected menu item.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
2.3.1

NETWORK MENU BASIC SETTINGS

2.3.1.1 IP
This menu option is used to set the DVR IP address.
Press "EDIT" and use the number keys 0-9 to enter the IP address. Use "
"ENTER" to confirm or "ESC" to cancel.
The entered IP address must not be in conflict with other IP addresses.
If there is a DHCP server in the network, address "0.0.0.0" can be set. Save and reboot the device. While rebooting, the device
will connect to the server and obtain a dynamic IP address displayed in the IP field.
DS1093-024
Figure 25: network menu (basic settings)
39
" to change the available options for the
" to shift the cursor. Press "EDIT" to cancel. Press