1. SYSTEM INTRODUCTION
1.15
Function Gesture
The function gesture controls what occurs when you tap the screen with two fingers.
Select the function as below.
1. Open the home screen, then select [Settings] - [General].
2. Tap [Function Gesture].
None
Screen Capture
Event
Home
Settings
Lists
Tide
Fusion Bar
3. Tap a function among the following:
[None]: Nothing happens.
[Screen Capture]: Capture the screen and save it to a micro SD card (or USB
memory). The message shown below appears. Tap [OK] to save the screen cap-
ture. The information following "TZT2SCREENSHOT" is the year, month, day,
hour, minute and second the screenshot was captured.
[Event]: Record an event. Select
a mark from the pop-up menu,
and the mark is put at the position
at the time the screen was tapped
(see paragraph 4.2.2). The posi-
tion, etc. is saved to the points list.
[Home]: Open the home screen
(see section 1.6).
[Settings]: Open the [Settings]
menu (see section 1.14).
[Lists]: Open the lists menu (see
section 1.14 and section 4.9).
[Tide]: Open the tide graph (see section 1.14 and paragraph 3.2.4).
[Fusion]: Open the Fusion screen (see section 9.7).
[Fusion Bar]: Show the Fusion operation bar (see section 9.7).
4. Tap the close button to finish.
1-28
Appears with connection of
TM
FUSION-Link
equipment.