Wireless Lan Settings; How To Connect The Existing Lan - Furuno TZTL12F Operator's Manual

1.18

Wireless LAN Settings

You can connect to the internet with the wireless LAN signal to download weather in-
formation (see chapter 11) and to connect to an iOS or Android
weather information, connect the existing LAN network. To connect to an iOS or An-
™
droid device, create a local wireless network.
About the wireless LAN
• The wireless LAN function is available only in the countries which have acquired ra-
dio wave certification. Turn this function off in countries which do not have radio
wave certification. Ocean-going vessels that have radio wave certification can use
the wireless LAN function in any country that has acquired radio wave certification.
Vessels with radio wave certification that enter a country that does not have radio
wave certification may use the wireless LAN function only onboard the vessel.
Available countries (as of 12/2014): USA, Canada, New Zealand, Australia, and Ja-
pan.
• The communication rate and effective range for the wireless LAN can be affected
by the electromagnetic wave, interfering object, or access point location.
• We strongly recommend using the wireless LAN with encrypted connection. Other-
wise unauthorized access by a third party can occur, which can cause loss of data
or system crash.
• We recommend changing the initial password when using a local wireless network.
1.18.1

How to connect the existing LAN

1. Open the home screen, then tap [Settings] - [General].
2. Tap [Connect to the Internet].
3. Tap [When Necessary]. Tap "<" to go back one layer.
4. Tap [Wireless LAN Settings].
5. Tap [Wireless Mode].
6. Tap [Connect to existing LAN]. Tap "<" to go back one layer.
1. SYSTEM INTRODUCTION
™
device. To download
1-31