Driver Installation - RME Audio ADI-2 Pro User Manual

23. Driver Installation

RME is constantly improving their drivers. Please download the latest driver from the RME
website at http://rme.to/usbe,
downloaded file and start the driver installation by a double-click on rmeinstaller.exe. Follow the
instructions of the installer. After installation connect computer and ADI-2 Pro. Windows detects
the new hardware as ADI-2 Pro and installs the drivers automatically.
After a reboot, the icon of the Settings dialog appears in the notification
area. Windows might hide it behind the triangle or upwards symbol.
Click on it to access it and to configure its appearance.
Driver Updates do not require to remove the existing driver. Simply install the new driver over
the existing one.
Possible reasons why an ADI-2 Pro is not found automatically:
•
The ADI-2 Pro is not switched on
•
The USB port is not active in the system (check the Device Manager)
•
The USB cable is not, or not correctly inserted into the socket
•
Use the ADI-2 Pro State Overview screen to verify USB is detected and working (chapter
15.3)
De-installing the Driver
A de-installation of the driver files is not necessary. Thanks to full Plug & Play support, the
driver files will not be loaded after the hardware has been removed.
Windows Plug & Play methods do not cover the registration of the ASIO driver. This entry can
be removed from the registry by a software de-installation request. This request can be found
(like all de-installation entries) in Control Panel, Programs and Features. Click on the entry
'RME MADIface', then Uninstall.
Firmware Update
Please see chapter 7. Under Windows the flash update tool requires the MADIface series driver
to be installed, see above.
48
driver_madiface_win_09554.zip
User's Guide ADI-2 Pro © RME
or newer. Unzip the