Ethernet Configuration Cli Commands - Avaya P334T-ML Installation And Configuration Manual

Ethernet Configuration CLI Commands

The following table contains a list of the configuration CLI commands for the
Ethernet feature. The rules of syntax and output examples are all set out in detail in
the Reference Guide.
In order to...
Set the auto negotiation mode of a
port
Administratively enable a port
Administratively disable a port
Set the speed for a 10/100 port
Configure the duplex mode of a
10/100BASE-T port
Configure a name for a port
Set the send/receive mode for flow-
control frames for a full duplex port
Set the flow control advertisement
for a Gigabit port when performing
autonegotiation
Set the priority level of a port
Display settings and status for all
ports
Display per-port status information
related to flow control
Display the flow control
advertisement for a Gigabit port
used to perform auto-negotiation
Display the CAM table entries for a
specific port
Display the CAM table entries for a
specific MAC address
Clear all the CAM entries.
Display the autopartition settings
Avaya P334T-ML User's Guide
Chapter 11 Avaya P330 Layer 2 Features
Use the following command...
set port negotiation
set port enable
set port disable
set port speed
set port duplex
set port name
set port flowcontrol
set port auto-negotiation-
flowcontrol-advertisement
set port level
show port
show port flowcontrol
show port auto-negotiation-
flowcontrol-advertisement
show cam
show cam mac
clear cam
show autopartition
79