Cleaning - Flavel RENOIR RC Installation, Maintenance & User Instructions

5.6.2.4 If at any time the power button is operated during thermostat mode the
control will cancel any thermostat operation and return the control to
manual mode.
5.6.2.5
IMPORTANT NOTE : Thermostat mode will not light the fire
automatically and will only regulate between the maximum and
minimum burner setting. The fire must be lit manually via the
handset and then you enter thermostat mode as described in this
section and set the temperature. When no longer requiring
thermostat mode turn off the burner and the handset will return to
manual mode.
5.7 CLEANING - WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool.
5.7.1 CLEANING THE FUELBED CERAMICS
We do not recommend regular cleaning of the fuelbed ceramics as these are
fragile and damage may result. None of these parts must be washed or
exposed to any cleaning agents or water.
Any damaged parts must be replaced by contacting your dealer or telephoning
BFM Europe Ltd. on the number stated on the rear cover of this book. The
fuelbed ceramics must only be replaced with a complete and genuine replacement
set and the fire must never be run with the wrong number or damaged fuelbed
ceramics. The ceramic fuelbed must be carefully re-assembled as stated in the
following section.
5.7.2 CLEANING THE OUTER CASTINGS
Dusting is normally all that is required. But where extra cleaning is necessary, use
a damp cloth.
49